Visit our two massive stores

Yatala, Gold Coast | (07) 3386 1600

Mon-Fri 9:00 am - 5:00 pm

Sat 9:00 am - 4:00 pm

Sun 9:00 am - 3:00 pm

(07) 3386 1600

Caboolture, Sunshine Coast | (07) 5432 3999

Mon-Fri 9:00 am - 5:00 pm

Sat 9:00 am - 4:00 pm

Sun 9:00 am - 3:00 pm

(07) 5432 3999

0
Arai - XD-4 Vision White/Orange Adventure Helmet
Arai - XD-4 Vision White/Orange Adventure Helmet
Arai - XD-4 Vision White/Orange Adventure Helmet
Arai - XD-4 Vision White/Orange Adventure Helmet
Arai - XD-4 Vision White/Orange Adventure Helmet
Arai - XD-4 Vision White/Orange Adventure Helmet

Arai - XD-4 Vision White/Orange Adventure Helmet

|

ARAI XD4 FEATURES GENERAL Outer shell: Complex Fibre Laminate (CFL) Complex Fibre Laminate (CFL) employs special fibre layers bonded by unique resins formulated by Arai, producing an extremely high fibre to low resin ratio. This carefully managed construction delivers strength, structural integrity and impact flexibility which allows the rounded outer shell to do its main job – deflect, absorb and disperse impact energy over the widest possible area. VENTILATION Tour-X4 Ventilation Easy to clean diffusers create a strong venture vacuum at the rear. Dual intake for increased airflow and lower noise level. Under-peak air intake collects and directs cool air into the helmet. Closable chin vent controls the airflow to the chin area. Inner chin vent shutter prevents debris coming into the helmet industy riding conditions. Brow ventilation, lower side vents and neck roll exhaust. FRONT VENTILATION Dual intake Designed for increased airflow and lower noise level, guiding fresh, cool air into the interior. Brow vents Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Three position chin vent Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider. Inner chin (bar) vent shutter Open and close the chin bar vents from the inside to prevent debris coming into the helmet in dusty riding conditions. REAR VENTILATION Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Removable diffuser Creates a tremendous amount of venturi vacuum at the rear. Can be easily removed (for cleaning) or replacement. Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. AERODYNAMICS Pull Down Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. VISOR Pinlock insert lens Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. INTERIOR Dry-Cool® Liner Arai´s Dry-Cool® material transfers heat and moisture away from the rider quickly and efficiently. Replaceable Cheek pads/Ear cups   Cheek pads/ear cups may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Remove by taking the frontside out first Place back by inserting the backside first   Replaceable Interior The complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Replaceable Chinstrap covers All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. 5mm ’’Peel Away’’ Ear cups/Cheek pads   Giving even more ability to craft the perfect fit and comfort, the cheek pads feature a 5 mm peel away layer for added room if needed.   5mm ’’Peel Away’’ Temple pad   Arai´s peel-away temple crown pads give the option of 5 mm more interior width if needed.   COMFORT Emergency Release System (ERS)   Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.   ARAI FEATURES Glancing Off To minimize impact energy getting into the helmet, it’s crucial that a helmet can slide over a surface. Arai believes that a Strong, Round & Smooth shell helps to increase a helmets ability to protect the rider during an impact. Shells with sharp edges or vent ducts that don’t break off can reduce the helmet’s ability to slide, sending energy into the helmet, or even enhance rotational energy. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.  Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Strong outer shell, soft inner shell Arai uses a very strong outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Organic shape The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house criteria, in addition to the mandatory ECE 22-05 standard. APPROVAL ECE 22-05

or 4 interest free payments of
Learn More >

free shipping

Sorry, there's only available

ORDER WITH JUMP THE QUEUE IN THE NEXT TO HAVE YOUR ORDER SHIPPED TODAY!
Order now to have your order dispatched tomorrow!

Product Details

ARAI XD4 FEATURES

GENERAL
Outer shell: Complex Fibre Laminate (CFL)

Complex Fibre Laminate (CFL) employs special fibre layers bonded by unique resins formulated by Arai, producing an extremely high fibre to low resin ratio. This carefully managed construction delivers strength, structural integrity and impact flexibility which allows the rounded outer shell to do its main job - deflect, absorb and disperse impact energy over the widest possible area.

VENTILATION
Tour-X4 Ventilation

Easy to clean diffusers create a strong venture vacuum at the rear. Dual intake for increased airflow and lower noise level. Under-peak air intake collects and directs cool air into the helmet. Closable chin vent controls the airflow to the chin area. Inner chin vent shutter prevents debris coming into the helmet industy riding conditions. Brow ventilation, lower side vents and neck roll exhaust.

FRONT VENTILATION
Dual intake

Designed for increased airflow and lower noise level, guiding fresh, cool air into the interior.

Brow vents

Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area.

Three position chin vent

Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider.

Inner chin (bar) vent shutter

Open and close the chin bar vents from the inside to prevent debris coming into the helmet in dusty riding conditions.

REAR VENTILATION
Neck exhaust vent

To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.

Removable diffuser

Creates a tremendous amount of venturi vacuum at the rear. Can be easily removed (for cleaning) or replacement.

Side exhausts

Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.

AERODYNAMICS
Pull Down Chin Spoiler

Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable.

VISOR
Pinlock insert lens

Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily.

INTERIOR
Dry-Cool® Liner

Arai´s Dry-Cool® material transfers heat and moisture away from the rider quickly and efficiently.

Replaceable Cheek pads/Ear cups

 

Cheek pads/ear cups may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.


  • Remove by taking the frontside out first
  • Place back by inserting the backside first

 

Replaceable Interior

The complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Replaceable Chinstrap covers

All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Facial Contour System (FCS)

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

5mm ''Peel Away'' Ear cups/Cheek pads

 

Giving even more ability to craft the perfect fit and comfort, the cheek pads feature a 5 mm peel away layer for added room if needed.

 

5mm ''Peel Away'' Temple pad

 

Arai´s peel-away temple crown pads give the option of 5 mm more interior width if needed.

 

COMFORT
Emergency Release System (ERS)

 

Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.



 

ARAI FEATURES
Glancing Off

To minimize impact energy getting into the helmet, it's crucial that a helmet can slide over a surface. Arai believes that a Strong, Round & Smooth shell helps to increase a helmets ability to protect the rider during an impact. Shells with sharp edges or vent ducts that don't break off can reduce the helmet's ability to slide, sending energy into the helmet, or even enhance rotational energy.

Five times inspected

Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. 

Washable interior

The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water.

Handmade

It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.

All-day comfort

All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.

Penetration tested

All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet.

Double-D ring device

The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.

Smooth shape, better protection

The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don't want to decelerate your helmet more than necessary. That's why all Arai vents and ducts are designed to break off during an impact.

Strong outer shell, soft inner shell

Arai uses a very strong outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.

Organic shape

The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head's natural shape for improved comfort, fit and to help minimize wind turbulence.

5-year limited warranty

All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.

Different outer shells

Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.

Arai In-house test

This Arai helmet is designed to meet the stringent Arai In-house criteria, in addition to the mandatory ECE 22-05 standard.

APPROVAL
ECE 22-05

Shipping

FREE* - ORDERS OVER $100

We offer free shipping on orders over $100 - if you keep it!

Additional charges apply to returns and exchanges, see returns policy for further information

$9* - ORDERS UNDER $100

We offer a flat rate shipping charge on orders under $100

Additional charges apply to exchanges, see returns policy for further information

BULKY GOODS - CALCULATED AT CHECKOUT

A flat rate bulky item charge is calculated at checkout according to location (if available). Applicable to items marked with the blue 'BULKY' banner on category page and/or BULKY symbol on product listing

EXPRESS - CALCULATED AT CHECKOUT

Calculated during checkout according to location, only available to selected products and postcodes

WAREHOUSE COLLECTION

Please note this is not a 'click and collect' service. Stock is sourced over multiple warehouses so may not be available at your chosen location immediately, a member of our online team will call you to confirm when your order is ready for collection.  Photo ID will be required upon collection of order.

All orders purchased with Credit Card will be required to show Photo ID and the Credit Card used to pay for the order (if this is not possible please choose alternative payment method).

*There are some exclusions to the FREE and FLAT RATE shipping offers as follows;

Bulky Items: Items that carry the “Bulky” Banner are classed as too big and/or too heavy to qualify for free shipping but are still allowed by Australia Post and will attract a bulky freight charge.  Items such as, but not limited to, gear bags, stands, tyres, ramps

Items that cannot be shipped: There are some items that exceed the size restrictions of Australia Post and/or are considered dangerous items and are subsequently unable to be shipped by our current logistics partners. These items are Warehouse Collection only.

 

Returns

 AMA is committed to customer satisfaction and have ensured our returns policy is consistent with our responsibilities under the guidelines of Australian Consumer Law and the ACCC.

If for any reason you are unsatisfied with your purchase, you may return the unused product/s within 30 days of delivery for a refund, or alternatively, exchange for another product. Please note that return freight is the responsibility of the customer.

All returned item/s must be in original unused condition, with all tags attached and product packaging intact.  

Refund or Store Credit - If your order qualified for the “Free freight over $100” promotion, a freight restocking fee equivalent to the original postage cost incurred by AMA will apply. If you have multiple items on the order and the order is still over $100 after removing the returned items, a freight restocking fee will NOT apply. 

Exchange - If you are wanting to exchange a product due to size, colour, or satisfaction reasons, AMA Warehouse will happily accommodate this. A flat rate $9 return freight charge applies to all exchanges. If we are unable to fulfill your desired exchange, a friendly AMA team member will give you a call to discuss alternative options.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Stu

Nice helmet, but a bit noisy

Product Details
ARAI XD4 FEATURES

GENERAL
Outer shell: Complex Fibre Laminate (CFL)

Complex Fibre Laminate (CFL) employs special fibre layers bonded by unique resins formulated by Arai, producing an extremely high fibre to low resin ratio. This carefully managed construction delivers strength, structural integrity and impact flexibility which allows the rounded outer shell to do its main job - deflect, absorb and disperse impact energy over the widest possible area.

VENTILATION
Tour-X4 Ventilation

Easy to clean diffusers create a strong venture vacuum at the rear. Dual intake for increased airflow and lower noise level. Under-peak air intake collects and directs cool air into the helmet. Closable chin vent controls the airflow to the chin area. Inner chin vent shutter prevents debris coming into the helmet industy riding conditions. Brow ventilation, lower side vents and neck roll exhaust.

FRONT VENTILATION
Dual intake

Designed for increased airflow and lower noise level, guiding fresh, cool air into the interior.

Brow vents

Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area.

Three position chin vent

Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider.

Inner chin (bar) vent shutter

Open and close the chin bar vents from the inside to prevent debris coming into the helmet in dusty riding conditions.

REAR VENTILATION
Neck exhaust vent

To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.

Removable diffuser

Creates a tremendous amount of venturi vacuum at the rear. Can be easily removed (for cleaning) or replacement.

Side exhausts

Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.

AERODYNAMICS
Pull Down Chin Spoiler

Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable.

VISOR
Pinlock insert lens

Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily.

INTERIOR
Dry-Cool® Liner

Arai´s Dry-Cool® material transfers heat and moisture away from the rider quickly and efficiently.

Replaceable Cheek pads/Ear cups

 

Cheek pads/ear cups may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.


  • Remove by taking the frontside out first
  • Place back by inserting the backside first

 

Replaceable Interior

The complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Replaceable Chinstrap covers

All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Facial Contour System (FCS)

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

5mm ''Peel Away'' Ear cups/Cheek pads

 

Giving even more ability to craft the perfect fit and comfort, the cheek pads feature a 5 mm peel away layer for added room if needed.

 

5mm ''Peel Away'' Temple pad

 

Arai´s peel-away temple crown pads give the option of 5 mm more interior width if needed.

 

COMFORT
Emergency Release System (ERS)

 

Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.



 

ARAI FEATURES
Glancing Off

To minimize impact energy getting into the helmet, it's crucial that a helmet can slide over a surface. Arai believes that a Strong, Round & Smooth shell helps to increase a helmets ability to protect the rider during an impact. Shells with sharp edges or vent ducts that don't break off can reduce the helmet's ability to slide, sending energy into the helmet, or even enhance rotational energy.

Five times inspected

Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. 

Washable interior

The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water.

Handmade

It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.

All-day comfort

All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.

Penetration tested

All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet.

Double-D ring device

The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.

Smooth shape, better protection

The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don't want to decelerate your helmet more than necessary. That's why all Arai vents and ducts are designed to break off during an impact.

Strong outer shell, soft inner shell

Arai uses a very strong outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.

Organic shape

The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head's natural shape for improved comfort, fit and to help minimize wind turbulence.

5-year limited warranty

All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.

Different outer shells

Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.

Arai In-house test

This Arai helmet is designed to meet the stringent Arai In-house criteria, in addition to the mandatory ECE 22-05 standard.

APPROVAL
ECE 22-05

Shipping

FREE* - ORDERS OVER $100

We offer free shipping on orders over $100 - if you keep it!

Additional charges apply to returns and exchanges, see returns policy for further information

$9* - ORDERS UNDER $100

We offer a flat rate shipping charge on orders under $100

Additional charges apply to exchanges, see returns policy for further information

BULKY GOODS - CALCULATED AT CHECKOUT

A flat rate bulky item charge is calculated at checkout according to location (if available). Applicable to items marked with the blue 'BULKY' banner on category page and/or BULKY symbol on product listing

EXPRESS - CALCULATED AT CHECKOUT

Calculated during checkout according to location, only available to selected products and postcodes

WAREHOUSE COLLECTION

Please note this is not a 'click and collect' service. Stock is sourced over multiple warehouses so may not be available at your chosen location immediately, a member of our online team will call you to confirm when your order is ready for collection.  Photo ID will be required upon collection of order.

All orders purchased with Credit Card will be required to show Photo ID and the Credit Card used to pay for the order (if this is not possible please choose alternative payment method).

*There are some exclusions to the FREE and FLAT RATE shipping offers as follows;

Bulky Items: Items that carry the “Bulky” Banner are classed as too big and/or too heavy to qualify for free shipping but are still allowed by Australia Post and will attract a bulky freight charge.  Items such as, but not limited to, gear bags, stands, tyres, ramps

Items that cannot be shipped: There are some items that exceed the size restrictions of Australia Post and/or are considered dangerous items and are subsequently unable to be shipped by our current logistics partners. These items are Warehouse Collection only.

 

Returns

 AMA is committed to customer satisfaction and have ensured our returns policy is consistent with our responsibilities under the guidelines of Australian Consumer Law and the ACCC.

If for any reason you are unsatisfied with your purchase, you may return the unused product/s within 30 days of delivery for a refund, or alternatively, exchange for another product. Please note that return freight is the responsibility of the customer.

All returned item/s must be in original unused condition, with all tags attached and product packaging intact.  

Refund or Store Credit - If your order qualified for the “Free freight over $100” promotion, a freight restocking fee equivalent to the original postage cost incurred by AMA will apply. If you have multiple items on the order and the order is still over $100 after removing the returned items, a freight restocking fee will NOT apply. 

Exchange - If you are wanting to exchange a product due to size, colour, or satisfaction reasons, AMA Warehouse will happily accommodate this. A flat rate $9 return freight charge applies to all exchanges. If we are unable to fulfill your desired exchange, a friendly AMA team member will give you a call to discuss alternative options.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Stu

Nice helmet, but a bit noisy

Similar Products

See it in action!

tag us using #AMAWarehouse on instagram and you might get featured!

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Stu

Nice helmet, but a bit noisy