Alpinestars Supertech S-M10 LE Squad Helmet Features:

CONSTRUCTION

• Carbon shell construction utilizes a highly advanced molding technology with a multi-composite combination:
• 3K, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell.
• UD carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy.
• Aramid fiber layer which provides critical penetration protection.
• This three-layer composite combination is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management.
• The combination of material layers gives improved energy management: limited outer shell deflection making the energy spread wider and better absorbed by the EPS liner.
• The result of the unique shell lay-up process employed in the M10 construction results in extremely effective impact protection.
• With a fully equipped helmet testing facility, within Alpinestars Racing Development Center, an exhaustive impact research program has resulted in the Supertech returning linear and oblique impact performance which far improves upon current helmet regulation standard limits.
• For direct, linear, impact by an average magnitude of 41% and for rotational acceleration, oblique, impact performance by an average of 48%.
• M10 in four anatomical shell sizes.
• The Supertech M10 shell construction is optimized to offer best fit across the range of four size options.
• Shell sizes are manufactured in small, medium, large and extra-large to ensure that riders have the correct fit which not only improves comfort but, most importantly, the effectiveness of the helmet in an impact.
• The Supertech M10 liner construction combines with the shell to offer highly efficient impact energy management.
• Formed with a multi-density EPS polymer, the energy absorbing layer gives an inner helmet profile which soaks up impact forces dissipated over the outer shell at the point of an impact and provides a shape offering a close and comfortable fit.
• The energy absorption performance of the M10 is substantially improved by a four-section construction that allows for specific densities of polymer to be prepared for different zones around the helmet lining. Not only is energy performance improved but also fit and comfort.

PROTECTION

• Conforming to both DOT certification and ECE homologation, the M10 is certified for use worldwide.
• The DOT 218 standard prescribes specific impact penetration protection over the crown of the helmet area and hence, for the US and Canada markets, the Supertech M10 will feature technology that substantially exceeded the minimum safety requirements.
• Collarbone protection is an important design feature of the Supertech helmet shell base profile.
• The base of the M10 has been sculpted to give a relief section, where the bottom profile is raised to clear the collarbone (Clavicle).
• The Supertech M10 chin-bar is formed with polypropylene which, by allowing for a degree of lateral deflection, further improves impact protection for the collarbones.
• Post-crash protection mechanisms are also a key feature of the Supertech design, allowing rapid and safe intervention if the rider has suffered a major impact.
• Multi-Directional Impact Protection System: MIPS.
• MIPS is incorporated into the Supertech M-10 to reduce rotational motion energies that impact the helmet causing damaging gyration force to be transmitted to the brain.
• A low friction ‘slip’ layer is incorporated into the Supertech M10 helmet, between the comfort padding layer and the multi-density polymer energy absorption shell.
• When energy is impacted upon the helmet, causing a rotation force, the MIPS layer allows for movement of the inner absorption layer to damp and re-direct the energy before causing significant acceleration stress to the brain. This mitigates the causes of brain injuries, such as concussion.
• Emergency Release System (ERS).
• The side cheek padding of the Supertech can be extracted efficiently and safely, while the helmet is still on the rider’s head, to allow ease of removal by trackside support and medical staff.
• The Supertech M10 is also designed to allow a helmet ‘Eject’ inflation system to be fitted into the inside crown of the shell.

Shipping

*There are some exclusions to the FREE and FLAT RATE shipping offers as follows;

Bulky Items: Items that carry the “Bulky” Banner are classed as too big and/or too heavy to qualify for free shipping but are still allowed by Australia Post and will attract a bulky freight charge.  Items such as, but not limited to, gear bags, stands, tyres, ramps

Items that cannot be shipped: There are some items that exceed the size restrictions of Australia Post and/or are considered dangerous items and are subsequently unable to be shipped by our current logistics partners. These items are Warehouse Collection only.

Returns

 AMA is committed to customer satisfaction and have ensured our returns policy is consistent with our responsibilities under the guidelines of Australian Consumer Law and the ACCC.

If for any reason you are unsatisfied with your purchase, you may return the unused product/s within 30 days of delivery for a refund, or alternatively, exchange for another product. Please note that return freight is the responsibility of the customer.

All returned item/s must be in original unused condition, with all tags attached and product packaging intact.  

Refund or Store Credit - If your order qualified for the “Free freight over $100” promotion, a freight restocking fee equivalent to the original postage cost incurred by AMA will apply. If you have multiple items on the order and the order is still over $100 after removing the returned items, a freight restocking fee will NOT apply. 

Exchange - If you are wanting to exchange a product due to size, colour, or satisfaction reasons, AMA Warehouse will happily accommodate this. If we are unable to fulfill your desired exchange, a friendly AMA team member will give you a call to discuss alternative options.