Supertech S-M8 FEATURES

→ Shell construction utilizes a highly advanced molding technology with a multi-composite combination: uni-directional carbon composite with aramid layer that gives significant radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and providing critical penetration protection.
→ This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the EPS liner.
→ The result of the unique shell lay-up process employed in the S-M8 construction results in extremely effective impact protection. With a fully equipped helmet testing facility, within Alpinestars Racing Development Center, an exhaustive impact research program has resulted in the Supertech M8 returning linear and oblique impact performance which far improves upon current helmet regulation standard limits. For direct, linear, impact by an average magnitude of 41% and for rotational acceleration, oblique, impact performance by an average of 48%.

S-M8 in four anatomical shell sizes.
→ The Supertech M8 shell construction is optimized to offer the best fit across the range of four size options. Shell sizes are manufactured in small, medium, large and extra-large to ensure that riders have the correct fit which not only improves comfort but, most importantly, the effectiveness of the helmet in an impact.

The Supertech M8 liner construction combines with the shell to offer highly efficient impact energy management.
→ Formed with a multi-density EPS polymer, the energy absorbing layer gives an inner helmet profile which soaks up impact forces dissipated over the outer shell at the point of an impact and provides a shape offering a close and comfortable fit.
→ The energy absorption performance of the S-M8 is substantially improved by a four section construction that allows for specific densities of polymer to be prepared for different zones around the helmet lining. Not only is energy performance improved but also fit and comfort.

Patented A-Head fitting height and angle adjustment system.
→ The Supertech M8 incorporates a patented system to allow the helmet to be tuned exactly to the riders preference for the height and angle at which the helmet sits on the head. This unique technology allows for an ultra-specific set-up that can be adapted for the type of riding and the rider's preference.
→ With a micro-adjustable pad that is connected to the helmet inner shell, it is possible to raise or lower the helmet fit and also, to tilt the helmet forward, or backward.

A unique, patented, visor release system is another key attribute incorporated into the design of the Supertech M8.
→ Visor release is a key part of overall protection performance in the helmet and a major influence on the distinctive, flush, design of the outer shell profile.
→ Alpinestars has developed a unique visor release system which, while ensuring the mounting is held securely in place for riding over the most extreme terrain and any track conditions, provides exactly the right level of resistance to ensure the visor detaches from the helmet shell if it is subjected to a significant impact - no matter what the angle.
→ The S-M8 visor release mechanism is conceived to avoid the inherent weaknesses in other types of anchoring systems. Maintaining shell integrity is vital for safety and with the possibility of multi-directional forces impacting on the visor, separation at the critical point of loading reduces potentially damaging leverage and rotational accelerations that refer injury to the rider's neck and spine.

Collarbone protection is an important design feature of the Supertech M8 helmet shell base profile.
→ The base of the S-M8 has been sculpted to give a relief section, where the bottom profile is raised to clear the collarbone (Clavicle). Also, incorporated into the area of the base pad, where it sits over the rider's collarbone, is an energy absorption pad; a more flexible compound rubber section which allows deflection when it contacts the Clavicle.
→ The Supertech M8 chin-bar is formed with polypropylene which, by allowing for a degree of lateral deflection, further improves impact protection for the collarbones.
→ Post-crash protection mechanisms are also a key feature of the Supertech M8 design, allowing rapid and safe intervention if the rider has suffered a major impact.

Multi-Directional Impact Protection System: MIPS.
→ MIPS is incorporated into the Supertech M8 to reduce rotational motion energies that impact the helmet causing damaging gyration force to be transmitted to the brain.
→ A low friction 'slip' layer is incorporated into the Supertech M8 helmet, between the comfort padding layer and the multi-density polymer energy absorption shell. When energy is impacted upon the helmet, causing a rotation force, the MIPS layer allows for movement of the inner absorption layer to damp and re-direct the energy before causing significant acceleration stress to the brain. This mitigates the causes of brain injuries, such as concussions.

Emergency Release System (ERS).
→ The side cheek padding of the S-M8 can be extracted efficiently and safely, while the helmet is still on the rider's head, to allow ease of removal by trackside support and medical staff.

The Supertech M8 is also designed to allow a helmet 'Eject' inflation system to be fitted into the inside crown of the shell.
→ Along with the ERS padding removal, 'Eject' allows for emergency removal of the helmet, without putting a load on the rider's spine.
→ Chin-strap: Wider than certification requirement: 26 mm for comfort and produced with a woven poly yarn to give a soft 'hand' feel that connects securely with a double D-ring.

Weight: Reduced by design while allowing the Supertech M8 protection to be class-leading.
→ Weight is both a factor in riding performance and safety in a helmet and to ensure the S-M8 offers the ultimate in weight saving performance enhancement, the material selection, preparation, and construction of the helmet has been rigorously analyzed for weight to strength and energy absorption properties and a strict analysis of all the components used in the Supertech M8 finishing.
→ Weight of S-M8 is 1300g for size Medium (ECE) - 1360g for size Medium (DOT)

Ventilation is a key feature of the Supertech M8.
→ Heat mapping tests have resulted in specifically designed ducting which produces a positive flow into the helmet over and around the rider's head, improving comfort while riding and reducing the on-set of heat stress in extreme conditions.
→ The visor design of the S-M8 is also an integral part of the ventilation system as it is profiled to direct airflow, acting as a channel to concentrate and smooth the flow into the shell. The Supertech M8 liner design is formed to optimize airflow channeling around the rider's head before being extracted from the S-M8 through rear exhaust vents to ensure positive pressure is maintained with constant airflow while riding.

Hydration system compatibility.
→ The Supertech M8 helmet lining design includes canals which allow a tube to be incorporated on either side of the shell. This is a feature extensively tested by Alpinestars rally raid and enduro riders enabling convenient fitting and connection to a hydration system.

Interior lining comfort.
→ Removable liner cover is washable and features a cool-max fabric interior and anti-bacterial talent yarn for long-lasting freshness and quick-dry performance between riding sessions.
→ Helmet features TPE coating washable surfaces to improve maintenance and increase durability.
→ Additional cheek pad set offering increased thickness of +5mm, for tighter fit adjustment - available separately.
→ Soft bag.

The Supertech M8 Certifications.
→ The Supertech M8 helmet versions conform to both DOT certification and ECE homologation for use worldwide.

Shipping

*There are some exclusions to the FREE and FLAT RATE shipping offers as follows;

Bulky Items: Items that carry the “Bulky” Banner are classed as too big and/or too heavy to qualify for free shipping but are still allowed by Australia Post and will attract a bulky freight charge.  Items such as, but not limited to, gear bags, stands, tyres, ramps

Items that cannot be shipped: There are some items that exceed the size restrictions of Australia Post and/or are considered dangerous items and are subsequently unable to be shipped by our current logistics partners. These items are Warehouse Collection only.

Returns

 AMA is committed to customer satisfaction and have ensured our returns policy is consistent with our responsibilities under the guidelines of Australian Consumer Law and the ACCC.

If for any reason you are unsatisfied with your purchase, you may return the unused product/s within 30 days of delivery for a refund, or alternatively, exchange for another product. Please note that return freight is the responsibility of the customer.

All returned item/s must be in original unused condition, with all tags attached and product packaging intact.  

Refund or Store Credit - If your order qualified for the “Free freight over $100” promotion, a freight restocking fee equivalent to the original postage cost incurred by AMA will apply. If you have multiple items on the order and the order is still over $100 after removing the returned items, a freight restocking fee will NOT apply. 

Exchange - If you are wanting to exchange a product due to size, colour, or satisfaction reasons, AMA Warehouse will happily accommodate this. If we are unable to fulfill your desired exchange, a friendly AMA team member will give you a call to discuss alternative options.